Loctite Extreme Glue Gel 18ml Tube

Loctite Extreme Glue No Drip Gel contains a revolutionary Flextec formulation that fuses multiple materials together for a long-lasting bond.

When a project or repair requires an adhesive with a higher viscosity and advanced resistance to extreme conditions, this liquid gel is your new go-to. This versatile, gap-filling glue seals and repairs nearly any surface, and it’s perfect for harsh conditions where constant flexing is a problem.

Loctite Extreme Glue No Drip Gel dries clear and minimizes dripping for a clean, professional finish on any household project. It’s even dishwasher safe! Plus, this glue is durable enough to use outdoors because it cures quickly and is resistant to vibration, impact, moisture, UV exposure, and extreme temperatures.

Recommended for:

Loctite Extreme Glue NO DRIP GEL is ideal for DIY repairs and modeling work in and around the house. It is compatible with many porous and non-porous materials such as metals1 (aluminum, stainless steel, steel, copper, brass, bronze, zinc, etc.), glass, concrete, ceramic, tiles, natural stones, wood, cork, paper, cardboard, textiles, leather, varnished surfaces1 , chipboard, MDF, fiberglass reinforced polyester, rigid PVC, polycarbonate, sanded ABS, and polystyrene foam/Styrofoam™ .

Limitations:

Not for use on polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE), and rubber • Before application, carry out tests to ensure the compatibility with non-ferrous metals such as aluminum, copper, bronze, and brass as well as with different coatings such as paints, varnishes and powder coatings. Variations in composition may affect adhesion • Not suitable for applications with prolonged water immersion • Not suitable for use in aquariums or potable water systems • Not suitable for applications requiring solvent resistance • Not suitable for applications requiring temperatures below -58°F (-50°C) and above 248°F (120°C) • Not suitable for archival applications • If bonding two non-porous surfaces, (i.e. metal to metal or plastic to plastic) surfaces can be pre-wetted with a damp cloth before applying the adhesive. Avoid wetness, pooling water or water drop formation, to optimize cure time.